GP-1860 Graphite PTFE Packing is a braided
packing made of PTFE yarn containing graphite
particles and anti-corrosive lubricant. It is
recommended for shafts for almost all
chemicals. Stability and long service lift are
achieved by low friction coefficient. It has
great tear strength and high thermal
conductivity. This self-lubricating packing
does not score the shaft and minimizes sleeve
replacement cost. It can be used to seal
alkalis, solvents, water, steam, acids except
strong oxidizing acids (aqua regia, fuming
nitric acid, fuming sulfuric acid, etc.)
forcentrifugal pumps, autoclaves agitators,
mixers, etc.
|
|
|
|
Pressure
|
Mpa
|
2
|
20
|
25
|
|
Temperature
|
℃
|
-240~280
|
|
Linear speed
|
M/s
|
16
|
2
|
2
|
|
PH range
|
0~14
|
|
Size
|
3mm ~ 50mm
|
GP-1866 is a Pump packing made of PTFE yarn
containing graphite particles and
anti-corrosive lubricant. It is recommended for
shafts for almost all chemicals. Stability and
long service lift are achieved by low friction
coefficient. It has great tear strength and
high thermal conductivity. This
self-lubricating packing does not score the
shaft and minimizes sleeve replacement cost. It
can be used to seal alkalis, solvents, water,
steam, acids except strong oxidizing acids
(aqua regia, fuming nitric acid, fuming
sulfuric acid, etc.) forcentrifugal pumps,
autoclaves agitators, mixers, etc.
|
|
|
|
Pressure
|
Mpa
|
2
|
20
|
25
|
|
Temperature
|
℃
|
-240~280
|
|
Linear speed
|
M/s
|
16
|
2
|
2
|
|
PH range
|
0~14
|
|
Size
|
3mm ~ 50mm
|
|
|
